Why we built Yada
Today a technical file is spreadsheets renamed for the tenth time and drawings scattered across inboxes. It doesn't have to be like this.

Launching soon
Yada is free CE compliance software for machine builders, integrators and consultants.
Machine dashboard
Technical file26 files
After the route
Hand over
The machine's life
Registers
Service desk2 open
Consulting
History
Reference
Regulations
Help
Machine
BRENTA-2026-0002
CapTight 500 · complete machine
The route13 of 16 documented
Describe the machine
Assess the risks
Collect the evidence
Declare and mark
Now · Describe the machine › Circuit diagrams
Which drawings do you have?
Now · Declare and mark › Declaration of Conformity
Which declaration does this machine need?
Applicability
Determination
Applicability · Determination
Determination
Apply, from your answers
MR 2023/1230Regulation (EU) 2023/1230 on machinery
RED 2014/53Directive 2014/53/EU (radio equipment)
EMC 2014/30 stays out · Radio permanently incorporated?: Yes
Absorbed by the RED: for a final radio product, electromagnetic compatibility is assessed under RED Art. 3(1)(b) on the whole product, not as a separate EMC Directive obligation.
Route
Module ANo notified body: you self-certify
not listed in Annex I: internal production control (Module A, Annex VI) applies automatically (Art. 25(4))
Circuit diagrams · All drawings
Electrical schematic
EL-0002 Electrical schematic rev. 2documented
What the drawing must show3 of 4 ticked
The main disconnecting device and every other device isolating the machine from an energy source, and how each is locked
From the drawing, p. 2
«-Q1 main switch 40 A, handle lockable in the OFF position (LOTO), operated from the panel door»
Not this one
Confirmed from the drawing, p. 2
The protective bonding circuit and the overcurrent protection of each circuit
Confirmed from the drawing, p. 2
The safety-related control circuits, emergency stop included, distinguishable from the others
Confirmed from the drawing, p. 3
Conductors, terminals and components identified with the same references they carry on the machine
Confirmed from the drawing, p. 1
EL-0002 rev. 2p. 2 of 6
Read againWithdraw
The declaration
The A4 sheet that will be filed, as it prints.
Dichiarazione di conformità UE
di macchine e prodotti correlati · Regolamento (UE) 2023/1230, allegato V, parte A
Macchina o prodotto correlato
Fabbricante e mandatario
Luogo di utilizzazione, per le macchine di sollevamento installate in modo permanente
Non applicabile
La presente dichiarazione di conformità è rilasciata sotto l'esclusiva responsabilità del fabbricante.
Oggetto della dichiarazione
L'oggetto della dichiarazione di cui al punto 5 è conforme alla normativa di armonizzazione dell'Unione seguente:
| Riferimento | Titolo e pubblicazione |
|---|---|
| Regolamento (UE) 2023/1230 | del Parlamento europeo e del Consiglio, del 14 giugno 2023, relativo alle macchine (GU L 165 del 29.6.2023, pag. 1) |
| Direttiva 2014/53/UE | del Parlamento europeo e del Consiglio, del 16 aprile 2014, concernente le apparecchiature radio (GU L 153 del 22.5.2014, pag. 62) |
La conformità ai requisiti essenziali di sicurezza e di tutela della salute applicabili di cui all'allegato III del regolamento (UE) 2023/1230 è stata dimostrata.
Riferimenti alle norme armonizzate o alle specifiche comuni applicate, o ad altre specifiche tecniche in relazione alle quali si dichiara la conformità, compresa la data:
| Riferimento e data | Titolo |
|---|---|
| EN ISO 12100:2010 | Sicurezza del macchinario - Principi generali di progettazione - Valutazione del rischio e riduzione del rischio |
| EN 60204-1:2018 | Sicurezza del macchinario - Equipaggiamento elettrico delle macchine - Parte 1: Regole generali |
Organismo notificato
Non applicabile
Controllo interno della produzione (modulo A)
La macchina o il prodotto correlato sono soggetti alla procedura di valutazione della conformità basata sul controllo interno della produzione (modulo A).
Informazioni supplementari
Line ticked, with the page it was confirmed on.
From 20 January 2027 the EU Machinery Regulation replaces the Machinery Directive. We think machine builders, integrators and consultants deserve a free, modern tool to get there.
Today a technical file is spreadsheets renamed for the tenth time and drawings scattered across inboxes. It doesn't have to be like this.

Answer plain questions. Yada works out which rules apply and whether you need a notified body.

A guided risk assessment on ISO 12100, sheet by sheet. Yada proposes, you choose.

Bring the files you already have. Each folder of the technical file shows what is still missing.

Yada drafts the declaration of conformity and the CE plate from your file. You sign.

Yada proposes, you decide. Nothing is declared, signed or shared until you say so.
Your customer receives the documents that go with the machine through a link with a password, for as long as you choose. The rest of your technical file stays private unless you share it.
Stuck on a step? Book a call with a Cenotian consultant from inside Yada, and choose what they get to see about your machine.
Yes. Sign up for the waiting list, and you start with your first machine as soon as you're in.
No. As the manufacturer, you declare conformity. Yada organises the work, shows what is missing and tells you when a notified body is needed.
The Machinery Regulation, and whether the EMC, radio equipment and low voltage directives apply to your machine. In English and Italian.
Yada is free. Leave your email and you'll be among the first in.